Multichannel coil driver unit SECU-Igniters

Многоканальный комутатор SECU-Igniters

Multichannel igniter unit SECU-Igniters. Designed and intended to drive ignition coils (oil filled coils, dry coils, multiple lead coils, COP etc). Can be used either with one of SECU-3 units or with any other ECUs.

 

  • 4 or 6 channels (maximum 6 channels)
  • Maximum current of each channel’s output (limited inside) – 7.5А
  • Maximum voltage on each channel’s output (limited inside) – 400V
  • Voltage drop (Vce) on the output transistor – 1.2V
  • Type of used output transistors – IGBT (IRGB14C40L)
  • Input control level – 5V (TTL)
  • Behaviour depending on input signal: turning on of current through the coil (beginning of the accumulation of energy) on the rising edge; breaking of current in the coil (spark) on the falling edge
  • Output for the high voltage tachometer  (“OR” circuit using diodes)
  • No over-temperature protection.

More photos of this unit:
Miltichannel ignition module for SECU EMSMiltichannel ignition module for SECU-3 ECUSECU-3 Igniters board (6 channels)SECU-3 Igniters board (4 channels)SECU-3 Igniters board (4 channels)SECU-3 Igniters moduleSECU-3 Igniters module

2 Comments

  1. KOTT 2,0L
    19.01.2018 @ 02:19 PM

    Алексей, сейчас ещё делаете такой модуль? или на BIP373 перешли??

  2. hopron
    25.06.2018 @ 07:29 PM

    Да, меня тоже интересует данный коммутатор.
    Как его можно приобрести?

Leave a Reply