Meaning of MAPSELO

Post Reply
kommando
Posts: 46
Joined: 03 Sep 2016, 19:58
Your CAR: Norton Commando
SECU version: official SECU-3T
Has thanked: 25 times
Been thanked: 15 times

Meaning of MAPSELO

Post by kommando »

In the remapping of output options there is a selection called MAPSELO, is this the MAP input 5V eg MAP+ or MAP_S or something else. Just playing around with the box and trying things out so not critical at all.

I upgraded firmware from 4.3 to 4.4 successfully so its all working well so far.
User avatar
STC
Posts: 13843
Joined: 30 Apr 2013, 23:41
Your CAR: AZLK 2140
SECU version: DIY SECU-3
Location: North Korea
Has thanked: 2160 times
Been thanked: 4335 times
Contact:

Re: Meaning of MAPSELO

Post by STC »

Hi, thank you for your question.
No, MAPSEL option is not related to MAP sensor. The meaning is "selection of lookup tables". Read this: http://secu-3.org/installation-manual-s ... g%20tables

One of free inputs can be remapped as MAPSEL0 and in conjunction with GAS_V input it can select between 4 set of tables. The truth table looks like this:
mapsel0-truth-table.png
mapsel0-truth-table.png (11.69 KiB) Viewed 7418 times
Author of the SECU-3™ project http://SECU-3.org. An open source engine control unit / Ignition control system, (C) 2007.
Клуб проекта в Facebook https://www.facebook.com/groups/secu3club
Клуб проекта ВКонтакте https://vk.com/secu3club (вступаем!)
kommando
Posts: 46
Joined: 03 Sep 2016, 19:58
Your CAR: Norton Commando
SECU version: official SECU-3T
Has thanked: 25 times
Been thanked: 15 times

Re: Meaning of MAPSELO

Post by kommando »

Very useful feature, so you have 4 switchable Maps, I know some racers who could use this in practise to see which suits that circuit best. I plan to use the normal 2 selectable Maps for high octane and low octane fuels.
User avatar
STC
Posts: 13843
Joined: 30 Apr 2013, 23:41
Your CAR: AZLK 2140
SECU version: DIY SECU-3
Location: North Korea
Has thanked: 2160 times
Been thanked: 4335 times
Contact:

Re: Meaning of MAPSELO

Post by STC »

Yes.
I plan to use the normal 2 selectable Maps for high octane and low octane fuels.
In this case you need to use only GAS_V input
Author of the SECU-3™ project http://SECU-3.org. An open source engine control unit / Ignition control system, (C) 2007.
Клуб проекта в Facebook https://www.facebook.com/groups/secu3club
Клуб проекта ВКонтакте https://vk.com/secu3club (вступаем!)
Post Reply

Return to “SECU-3 (English)”