Data connection turned on and off

All questions related to firmware
Post Reply
Matthias
Posts: 2
Joined: 21 Jun 2016, 15:58
Your CAR: Testastretta
SECU version: official SECU-3T
Been thanked: 1 time

Data connection turned on and off

Post by Matthias »

Hello my name is Matthias I'm new here and I now before me an insurmountable task.

I have a Secu3 T USB 644 Mega.
After unpacking and connecting the PC for the first time everything works.

I wanted to install the injection firmware and after that the Manager remained disconnected was not subsequently constructed a "reset EEprom".

I have now the Manager V4.3 Installs. made: "Write Flasch from file". with sonnect the boat pin.
(I have it understood must match that of the manager and the firmware) :shock:

My problem now is the manager always connected 1 second of 2 and second of disconnected.
In setting the com port speeed 9600 at the Manager and com -port boot loader 57600
if setting in Manager 57600 and 57600 bootloader we established no connection.

In Pc the port speed is set to 9600 .

the connection via Bluetooth is built but also switches on and off.

Have I damaged the EEbrom ??? And there is a file for EEbrom dounloaden.

please to be able to help continue to my project.

please pardon for my bad english,
User avatar
STC
Posts: 13843
Joined: 30 Apr 2013, 23:41
Your CAR: AZLK 2140
SECU version: DIY SECU-3
Location: North Korea
Has thanked: 2160 times
Been thanked: 4335 times
Contact:

Re: Data connection turned on and off

Post by STC »

Hi,
Please use firmware and SECU-3 Manager v4.3.
In the settings of the SECU-3 Manager use 57600, 57600. Do not use check "data in hex".
Try to go to Firmware data tab and if connection is stable, open popup menu and select Reset EEPROM.
Author of the SECU-3™ project http://SECU-3.org. An open source engine control unit / Ignition control system, (C) 2007.
Клуб проекта в Facebook https://www.facebook.com/groups/secu3club
Клуб проекта ВКонтакте https://vk.com/secu3club (вступаем!)
Matthias
Posts: 2
Joined: 21 Jun 2016, 15:58
Your CAR: Testastretta
SECU version: official SECU-3T
Been thanked: 1 time

Re: Data connection turned on and off

Post by Matthias »

Thanks now it works.
Post Reply

Return to “Firmware”